Buying a servo amplifier, evaluating a used machine, licensing programming software or tracking down a manual — these are decisions where a wrong call costs real downtime and money. This page collects the field-tested references CNC engineers actually use before spending, grouped by the decision you are facing.
Repair, replace or buy refurbished
- Refurbished vs New FANUC Servo Amplifier: Cost Comparison — Real cost drivers, a repair-or-replace decision table, and what a refurbished unit should be tested for before you buy.
- FANUC Servo Amplifier Replacement: Safe Teardown and Swap — Power-off and discharge sequence, teardown order and the re-commissioning checks that keep a replacement from becoming a second failure.
Buying used equipment
- Used CNC Machine Electrical Inspection Checklist — 30 electrical checks before you pay the balance — battery state, amplifier alarm history, grounding, backups and hidden wear sellers rarely mention.
Software licensing and manuals
- FANUC CNC Simulation Software: Official CNC Guide Family — What the official simulation and guide products actually include, hardware-key and licensing models, and the education-package limits.
- HEIDENHAIN iTNC 530 Manuals: Software Numbers vs Document IDs — Why NC software version numbers are not document IDs, how to find the right manual for a 340 49x / 606 42x family, and what is genuinely official.
All guides state the control family and series they apply to and are written from live-machine experience, not from datasheets. Verify part numbers and firmware on your own machine before ordering. Prices and licensing terms change — confirm with the vendor or your supplier at the time of purchase.
Frequently asked questions
Is a refurbished FANUC servo amplifier worth it over a new one?
It depends on the failure history and the test evidence supplied with the unit. A refurbished amplifier with a documented full-axis load test is a reasonable cost saving on older machines; a unit sold without test records is a gamble. Compare the price difference against the risk of a second downtime. See the cost-comparison and decision table linked above.
What should I check electrically before buying a used CNC machine?
Battery and parameter-backup state, servo and spindle amplifier alarm history, grounding and insulation, a verified parameter and ladder backup taken before possession, and hidden wear such as backlash and pitch-error compensation. The 30-point checklist linked above walks through each item.
Are FANUC simulation and programming tools free?
The official CNC Guide family is a licensed commercial product. An education package exists with reduced path and axis limits, and no free full-function version is published by the vendor. Third-party simulators are not endorsed. Details are in the software guide linked above.
How do I find the correct HEIDENHAIN manual for my control?
Match the NC software version family first, then look up the specific document ID — the two are different numbers. Manuals are distributed through the vendor’s portal in language-specific folders. The guide above explains the mapping and flags the common mistakes.
